Why do you have to stop using fluorescent tubes?
Why do you have to stop using fluorescent tubes?
We all know fluorescent tubes. They light up slowly, flash,
make noise, and have a short life and high energy consumption. That's why we
sell LED tubes. These products do not require any special design, do not flash,
are noisy, last up to 5 times longer and have about 60% less energy consumption
than a fluorescent tube.
LED Panel:
An LED panel (or slab) is a square luminaire that you can
use instead of a tube luminaire. If you buy a good quality sign, you can earn
even more than with LED tubes.
- · The panels have lower energy consumption than fluorescent tubes and LEDs. A panel of good quality consumes about 28W, a luminaire equipped with tubes, with the same characteristics consumes 73W! You can replace your 4-tube fixture with one panel. In this way, your investment can be quickly profitable.
- · Ballasts, required in conventional installations, have a loss of energy. This means that the ballast itself consumes energy, making the tubes even less efficient. The slabs are equipped with high-quality drivers, with a high power factor. This means that they lose little energy and allow you to save even more on your costs.
- · The UGR (Unified Glare Ratio) value of the panels is better than that of the tubes. This value is used to measure the amount of glare produced by brightness in a specific environment. The lower this value, the better. The high-quality slabs have a UGR value of less than 19, the best on the market. These panels have a slight diamond-shaped layer that reflects light in all directions. This gives a neutral and uniform light.
- · The good quality panels have a longer life than the tubes. LED tubes have a life of about 50,000 hours, this time can be reduced if the tubes are exposed to dirt and moisture. The panels have a lifespan of up to 70,000 hours. This time is never affected by dirt or moisture.

Comments
Post a Comment